Srinivasa Agencies

Jbz-A12 Paper Cup Machine is the automatic environmental machine with multi-running positions. This machine runs a whole procedure of paper-feeding, cup-fan-wall sealing, oiling, bottom-punching, heating, rolling, rimming, rounding and tripping. This machine is an ideal equipment for producing drinking cup, ice-cream cup and other food cone-shaping containers. It is mainly used to making one side PE coated paper cups from 3 oz to 12 oz or above 12oz.

Features:

• Automatic control adopts an optically controlled non-contact switch
• Micro-controlled transducer
• Step-less speed adjustment
• Paper cup-fan-wall body sealed by the heater
• Paper cup bottom sealed by the heater
• Full automatic
• Easy changing molds produce different sizes paper cups
• Easy operating by the operator (one operator is enough)
• Easy maintenance with minimum cost
• Cheap operating cost and low investment
• Amelioration: Air compressors aren’t required for this type paper cup machine.

We are offering Fully Automatic Paper Cup Machine to our clients.

Features:

• We using divided box is 125 type, which has two years warranty.
• New design use 4 heaters & 1 curling equipment, normal machine design only 3 heaters & 1 curling equipment, new design keep sure cup will not any leakage problem.
• We use big and thickness bearing on a machine that is easy for machine target higher speed will not break, normal machine bearing is weak if the machine running a long time or target high speed very easily broken.
• New machine design use double belt connect reducer and main motor, normal machine design only single belt, double belt for keep machine stable running also less broken.
• We used three-tier chain in a new machine, normal machine design uses two-tier chain. Three tier chain for keep machine stable running while the machine speed going higher (50 pcs/min).
• New design we adopt the pushdown cup stainless steel shaft, old design only simple iron rail which only double shaft easy broken and rust.
• New design cup machine inside paper fan sealing parts with bend rod design, the machine running with high-speed paper fan sealing will not be jam.

We are offering JBZ-H12 Paper Cup Machine to our clients.

Features:

• We using divided box is 125 type, which has two years warranty.
• New design use 4 heaters & 1 curling equipment, normal machine design only 3 heaters & 1 curling equipment, new design keep sure cup will not any leakage problem.
• We use big and thickness bearing on a machine that is easy for machine target higher speed will not break, normal machine bearing is weak if the machine running a long time or target high speed very easily broken.
• New machine design use double belt connect reducer and main motor, normal machine design only single belt, double belt for keep machine stable running also less broken.
• We used three-tier chain in a new machine, normal machine design uses two-tier chain. Three tier chain for keep machine stable running while the machine speed going higher (50 pcs/min).
• New design we adopt the pushdown cup stainless steel shaft, old design only simple iron rail which only double shaft easy broken and rust.
• New design cup machine inside paper fan sealing parts with bend rod design, the machine running with high-speed paper fan sealing will not be jam.

Paper Cup Die Cutting Machine is an ideal and professional machine with die-cutting creasing embossing and full-stripping various PE coated paper, normal paper, corrugating paper and plastic material. It applies to a paper cup, paper box, medical package, package, food package and other environmental protection products. It adopts micro-computer, HMI, servo positioning, alternating current frequency converter, automatic counting, photoelectric rectifying, pneumatic lock cutting plate, electromagnetic clutch, centralized oil lubrication, overload protection and distinctive gearing. All of these is the guarantee of steady pressure, precise positioning, smooth running, safety and reliability operation.

Feature:

• The working speed is 90-140 times per minute. It has the ability to die-cutting, creasing and embossing for various shapes.
• Paper conveyed by a servo motor to ensures steady and accurate conveying. Photoelectricity sensor checks the color code for printing to ensure fix the paper position accurately.
• The electric control system uses PLC and HMI. Equipped with safety refinements to make acousto - optical alarming and auto stop when some faults.
• Worm gear and worm transmission system ensures the powerful and steady pressure. It is very convenient and accurate to adjust pressure through HMI.
• Lubricating with oil circulation and alarming when lack of oil to ensure smooth running and prolong the machine life.
• The die-cutting frame uses pneumatic locking system to convenient operation. Die-cutting down steel board from Taiwan is accurate and lasts forever.
• It adapts electric control pneumatic clutch to protect the machine when start and emergency stop. The flywheel provides a mounting location to the clutch and also can increase the pressure.

 

Specifications:

We are offering Paper Cup Die Cutting Machine to our clients.

Advantages:

• Remove the waste in the hole of the product automatically, such as an envelope with window, food packing box
• Blow away the scraps on both sides of the product
• Load and feed material automatic by photoelectric
• Suitable for printed or blank roller paper (any weight paper, single or double PE coated)
• Die cutting nearly no waste, saving material
• Adopt flat die cutting mould and knife plate is very cheap

Advanced Paper Cup Die Cuting Machine is an ideal and professional machine with die-cutting creasing embossing and full-stripping various PE coated paper, normal paper, corrugating paper and plastic material. It applies to a paper cup, paper box, medical package, package, food package and other environmental protection products. It adopts micro-computer, HMI, servo positioning, alternating current frequency converter, automatic counting, photoelectric rectifying, pneumatic lock cutting plate, electromagnetic clutch, centralized oil lubrication, overload protection and distinctive gearing. All of these is the guarantee of steady pressure, precise positioning, smooth running, safety and reliability operation.

Feature:

• The working speed is 90-140 times per minute. It has the ability to die-cutting, creasing and embossing for various shapes.
• Paper conveyed by a servo motor to ensures steady and accurate conveying. Photoelectricity sensor checks the color code for printing to ensure fix the paper position accurately.
• The electric control system uses PLC and HMI. Equipped with safety refinements to make acousto - optical alarming and auto stop when some faults.
• Worm gear and worm transmission system ensures the powerful and steady pressure. It is very convenient and accurate to adjust pressure through HMI.
• Lubricating with oil circulation and alarming when lack of oil to ensure smooth running and prolong the machine life.
• The die-cutting frame uses pneumatic locking system to convenient operation. Die-cutting down steel board from Taiwan is accurate and lasts forever.
• It adapts electric control pneumatic clutch to protect the machine when start and emergency stop. The flywheel provides a mounting location to the clutch and also can increase the pressure.

 

Specifications:

High Speed Die Cutting Machine is an ideal and professional machine with die-cutting creasing embossing and full-stripping various PE coated paper, normal paper, corrugating paper and plastic material. It applies to a paper cup, paper box, medical package, package, food package and other environmental protection products. It adopts micro-computer, HMI, servo positioning, alternating current frequency converter, automatic counting, photoelectric rectifying, pneumatic lock cutting plate, electromagnetic clutch, centralized oil lubrication, overload protection and distinctive gearing. All of these is the guarantee of steady pressure, precise positioning, smooth running, safety and reliability operation.

Feature:

• The working speed is 90-140 times per minute. It has the ability to die-cutting, creasing and embossing for various shapes.
• Paper conveyed by a servo motor to ensures steady and accurate conveying. Photoelectricity sensor checks the color code for printing to ensure fix the paper position accurately.
• The electric control system uses PLC and HMI. Equipped with safety refinements to make acousto - optical alarming and auto stop when some faults.
• Worm gear and worm transmission system ensures the powerful and steady pressure. It is very convenient and accurate to adjust pressure through HMI.
• Lubricating with oil circulation and alarming when lack of oil to ensure smooth running and prolong the machine life.
• The die-cutting frame uses pneumatic locking system to convenient operation. Die-cutting down steel board from Taiwan is accurate and lasts forever.
• It adapts electric control pneumatic clutch to protect the machine when start and emergency stop. The flywheel provides a mounting location to the clutch and also can increase the pressure.

 

Specifications: